H2 Treated Pine – PRICE REDUCTION

You read it correctly! We have reduced our price on our 90 x 45 H2 treated pine from $3.00/m down to $2.80/m!
Make your order now and start building with new H2 treated pine to make those termites buzz off!
How to Install Insulation Wall Batts
Installing Insulation wall batts in the wall cavity is quite easy. Before you start, you need to make sure all electricity is switched off, all electrical cables are safely out of your way and you are working in a clean and organised environment. If you are unsure about how to install insulation wall batts, here are a few steps instructing how to do this. Please note though, depending on your location (i.e. around down lights in your ceiling) make sure to follow any instructions provided by the light fitter or barrier manufacturer.
Tools needed for this project
- 1.8 single sided aluminium step ladder
- Dust mask
- Safety knife
- Leather/safety gloves
- Designated insulation suitable for your project
Step 1: Firstly, before purchasing any size insulation, locate your desired area. If you wish to install insulation in your walls, you will need to purchase Wall Batts. If in your ceiling, then Ceiling batts.
Step 2: You will like to measure the span between your studs, in a case whether it would be 400mm, then you would want to purchase a 430mm Greenstuff R1.5 wall batt. Depending on your insulation levels and price range, you can always go with a higher rating, this is the “R1.5”.
Step 3: After m
asuring the lenghts, trim your batts to size using your safety knife. Note: Cut the batts slightly longer to keep it nice and tight for installation. Once cute, insert your wall batts comepetely in between your studs leaving a nice snug finish
And you’re done!
Relatable links:
Insulation: Insulation
Wall Batts: Wall Batt Insulation
Ceiling Batts: Ceiling Batt Insulation
Acoustic Batts: Acoustic Batt Insulation
What The Deck?!

Has your decking started rotting, lost its colour or just isn’t safe to walk on? I think it’s time to rip it out and install some new, fresh hardwood decking!
Timber and Building Supplies has a range of hardwood decking such as Merbau, Blackbutt, Spotted Gum and Northern Box. With the additional Pine and Modwood deckging. Starting at as low as $2.85 per lineal meter, you can get that new fresh deck look again.
Quick links:
Blackbutt: Blackbutt Decking
Merbau: Merbau Decking
Northern Box: Northern Box Decking
Pine: Pine Decking
Spotted Gum: Spotted Gum Decking
Follow Us Twitter!
Keep up to date by following our twitter news feed! Click here
We’d like to say a big THANK YOU!
At Timber & Building Supplies, we’d like to give a big THANK YOU to all the support we’ve had during the process of developing our new website! As of being in the industry for over 25 years, it has taken time for us at Timber & Building Supplies to offer the public our easy checkout ordering system for our products we have to offer.
We are glad to say our website is full of useful information on our products as well as a very user-friendly interface to make it easy for everyone to create an order.
Please note that there may be a few bugs in our system, if so, please contact daniel@timberandbuildingsupplies.com.au and let him know!
Thank you, we hope you enjoy the new, revolutionised way of placing orders in the construction industry.